SRP1300A Broadband Sander Series
1. This machine's abrasive roller beam support uses high-quality castings, heavy volume, and special processing and precision processing, which have stable performance and high accuracy.
2. The base of the machine tool is made of heavy channel steel and high-quality plates. The main motor is a fixed chassis structure, which has a low center of gravity, stable operation, and convenient installation and maintenance.
3. Coarse sand rolls use thick-walled large-diameter steel rolls. After precision dynamic balance processing, they have strong cutting performance and stable performance.
4. The fine sand rubber roller adopts high-quality rubber roller, equipped with imported polishing pad, and the quality of the sanded board is smooth and straight.
5.Using the photoelectric control system to control the belt swing, and equipped with the photoelectric and photoelectric panel automatic dust blowing device, it will never break the belt due to the dust blocking the photoelectric.
6. Set up a new type of belt swing, overshoot mechanism and power-off automatic brake protection system to achieve human-machine safety.
7.Feeding is equipped with a high-power stepless speed changer, which is strong and powerful, suitable for sanding different materials.
8. Abnormal situation protection function: When abnormal conditions such as emergency stop, low air pressure, broken belt, running belt, etc. occur during normal use of the machine tool, the table will automatically lower to prevent the abrasive belt from coming into strong contact with the workpiece, damaging the machine or Abrasive belt.
9. The discharge side is equipped with a brush roller dust removal mechanism to remove dust on the surface of the workpiece.
The main technical parameters
|Shortest sanding length (fixed thickness)||mm||300||300||300|
|Shortest sanding length (polished)||mm||500||500||500|
|Coarse (front) roller speed||m/s||19||19||19|
|Fine (rear) sand roll speed||m/s||18||18||18|
|Total machine power||kW||57||36.5||21|
|Suction port diameter||mm||Φ150*5||Φ150*5||Φ150*5|
|Dust extraction air volume||m3/h||9500||9500||9500|
The company reserves the right to change the above parameters. The appearance and data are subject to change without notice.